View Single Post
Old 11-23-2019, 10:38 AM   #16
Senior Member
dmaxweb's Avatar
Join Date: May 2010
Location: Williamsburg, VA
Posts: 378
Default Re: Alternate Door Panel Clips for 30 Coupe

Problem solved!

A. I started with Auveco 11406
B. Using a screw driver spread open the "C" head a bit to account for the larger hole in the panel.
C. Cut a small amount off the legs for the top 5 holes so they would not bottom out on the window channel. Taking into consideration the thickness of the panel, only cut off enough to prevent bottoming out or there won't be enough left to grab. May still need need to bend legs a bit.

Out of the box on left, modified on right
Attached Images
File Type: jpg 20191123_101119.jpg (16.4 KB, 14 views)
dmaxweb is offline   Reply With Quote