The Ford Barn - View Single Post

40cpe · 12-03-2019, 07:14 PM

Since the fire from the coil is checked to ground before the distributor, I would first clean the point contacts, check for freyed or shorted wire in the distributor, then replace the condenser.

12-03-2019, 07:14 PM	#3
40cpe Senior Member Join Date: May 2010 Location: Star, MS Posts: 4,024	Re: No fire from coil Since the fire from the coil is checked to ground before the distributor, I would first clean the point contacts, check for freyed or shorted wire in the distributor, then replace the condenser.