View Single Post
Old 11-30-2019, 02:20 PM   #4
Ronnieroadster
Senior Member
 
Ronnieroadster's Avatar
 
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,525
Default Re: Flathead domed pistons and 21A rods

Yes they are for the ARDUN heads. The price for a set of Ross ARDUN pistons is usually about $80.00 per piston including the pin and rings. The stock Ford flathead rods included in the deal would be the weak link with the compression those domes will end up giving in the combination. However im sure economy can be gained using them.
Ronnieroadster
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline.
First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH

Last edited by Ronnieroadster; 11-30-2019 at 05:27 PM.
Ronnieroadster is offline   Reply With Quote