View Single Post
Old 11-29-2019, 09:28 PM   #1
Senior Member
Sid's Avatar
Join Date: May 2010
Location: Rathdrum Idaho
Posts: 642
Default Isky Max 1 valve lash

Does anyone have a recommendation for cold valve lash on a Isky Max 1 cam. Isky recommends .014 hot. It's obvious they must not be familiar with flatheads. I know that generally on an ohv engine you give about +.002 for a cold setting. Motor has close to 800 miles so everything should be settled in by now. This is a 59AB Any info. is appreciated.
Sid is offline   Reply With Quote