View Single Post
Old 10-15-2019, 01:30 PM   #6
Senior Member
ryanheacox's Avatar
Join Date: Apr 2013
Location: Northwest CT
Posts: 757
Default Re: Rear spring shackle

Originally Posted by rotorwrench View Post
Something doesn't seem right with those figures since the fit would be too tight unless the bushing bore is reamed. The two parts should be close to each other in size. At least within a few thousands. Parts that are usually reamed for best fit are still relatively close in size to begin with . If not, the parts aren't made correctly or they are the wrong parts.

You're right, I typed 9/16 and thought 7/16
ryanheacox is offline   Reply With Quote