Re: Brake Adjustment
An interesting point is that in the Bulletins and in Les Andrews, the initial setting of the brake rods of some precise length of 51-7/16 to 51-1/2 is mentioned as if that is some kind of precise measurement after all is said and done. I think they should point out that this is simply a beginning point and not have it down to the 16th of an inch. It leads one (at least a beginner) to think that is a final measurement. But, it was written 90 years ago, so it ain't going to change.
With all new components, I took great care to measure my brake rods only to adjust them by quite a bit in the step where you take up the slack after adjusting each individual wheel. Hopefully people don't measure their brake rods and not adjust the clevises when taking up the slack.
|