The Ford Barn - View Single Post

redmodelt · 11-07-2018, 02:26 AM

If you have the flywheel surfaced, make sure they do the lip where the pressure plate sits too. The machined area where the pressure plate sits sets the distance between the face and it.

11-07-2018, 02:26 AM	#8
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,340	Re: My Clutch Job Observations If you have the flywheel surfaced, make sure they do the lip where the pressure plate sits too. The machined area where the pressure plate sits sets the distance between the face and it. __________________ I know the voices aren't real but damn they have some good ideas!