The Ford Barn - View Single Post

Tom Wesenberg · 05-22-2016, 02:32 PM

I would spin the gear as you slowly lay it against the driveshaft. As soon as you can't spin the gear see how much distance you have to seat the housing. This will be the amount of teeth engagement. Maybe you need a different housing that lets the gear engage more.

05-22-2016, 02:32 PM	#18
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Speedometer / speedometer drive gear I would spin the gear as you slowly lay it against the driveshaft. As soon as you can't spin the gear see how much distance you have to seat the housing. This will be the amount of teeth engagement. Maybe you need a different housing that lets the gear engage more.