The Ford Barn - View Single Post

Tom's36coupe · 09-07-2010, 08:19 PM

If you go to the motorcityspeedequipment site I think there might be a way to contact Mark. Always was very helpful to me and when I met him he was very down to earth. His heat attack almost killed him, and he said sometimes he wished it had. Lost just about everything after all of the expense of the hospital care. Hey, I found my Crower timing tag, it reads: part number E-33794, grind number SPL 59 A Early 262 duration on intake and exhaust and .383 lift with 112 lobe separation. Good luck in finding Mark, I am sure he will have some good information for you.

09-07-2010, 08:19 PM	#47
Tom's36coupe Senior Member Join Date: Aug 2010 Location: Bay City, Michigan Posts: 549	Re: How's your cam ?? If you go to the motorcityspeedequipment site I think there might be a way to contact Mark. Always was very helpful to me and when I met him he was very down to earth. His heat attack almost killed him, and he said sometimes he wished it had. Lost just about everything after all of the expense of the hospital care. Hey, I found my Crower timing tag, it reads: part number E-33794, grind number SPL 59 A Early 262 duration on intake and exhaust and .383 lift with 112 lobe separation. Good luck in finding Mark, I am sure he will have some good information for you.