The Ford Barn - View Single Post

Purdy Swoft · 12-03-2019, 01:45 PM

I either use the longer water pump shaft and grind for at least six thousands clearance at the rear of the shaft where it meets inside the head . There is a collar that can be installed on the water pump shaft , behind the fan and the pump doesn't need to be disassembled .

12-03-2019, 01:45 PM	#8
Purdy Swoft Senior Member Join Date: May 2010 Location: Alabama Posts: 8,099	Re: water pump end play how to stop? I either use the longer water pump shaft and grind for at least six thousands clearance at the rear of the shaft where it meets inside the head . There is a collar that can be installed on the water pump shaft , behind the fan and the pump doesn't need to be disassembled .