The Ford Barn - View Single Post

rotorwrench · 12-02-2019, 02:34 PM

The operating shaft has to remain in one orientation or it could decouple itself. These things were used from 1940 till 1973 so they went through variations over the years. Some had terminal screws and others had just wires extending from the case and who knows what internal differences. Most all of them have the 1-inch protrusion of the shaft except the odd ones for X frame applications or other frame/body obstruction situations.

12-02-2019, 02:34 PM	#2
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,436	Re: Od solenoid with a key on the plunger The operating shaft has to remain in one orientation or it could decouple itself. These things were used from 1940 till 1973 so they went through variations over the years. Some had terminal screws and others had just wires extending from the case and who knows what internal differences. Most all of them have the 1-inch protrusion of the shaft except the odd ones for X frame applications or other frame/body obstruction situations.