[Werner]

Hello and good day each other.

I have 4 questions about the restoration of the clutch.

1) The pressure plate was already turned off and honed early lathe. Does anyone know the given minimum / wear measure (thicknes)?
I measure 14.1 mm.

2) How thick is the pressure disc plate new?

3) In the pressure plate mechanic I discover different compression springs: red, green, brown; shorter and longer.

Does the color coding have a meaning (spring tension)?

What is the correct spring length? I measure 56 mm and 51 mm.

4) Under the compression springs in the little pans are round inserts made of plastic. They are very hard and brittle. Is that correct?

I thank you in advance!