The Ford Barn - View Single Post

Purdy Swoft · 10-14-2019, 11:54 AM

Using a socket and a ratchet on a no nut clamp should be easier than having to use two pieces when a bolt and NUT is used . Though I have installed a lot of original exhaust manifold clamps , it was always a pain to me when having to reach around the clamp and hold the nut .

10-14-2019, 11:54 AM	#13
Purdy Swoft Senior Member Join Date: May 2010 Location: Alabama Posts: 8,099	Re: No nut manifold clamp Using a socket and a ratchet on a no nut clamp should be easier than having to use two pieces when a bolt and NUT is used . Though I have installed a lot of original exhaust manifold clamps , it was always a pain to me when having to reach around the clamp and hold the nut . Last edited by Purdy Swoft; 10-14-2019 at 12:00 PM.