The Ford Barn - View Single Post

Patrick L. · 12-22-2019, 12:54 PM

I don't see a problem using the 6v generator with 50/32 CP lites. If used quite a bit then you might want to bump up the out put to about 12 amps [ versus 2-4 for normal use]. [ I don't need to use high beams]
If an EVR is used then you don't have to worry about always messing with the 3rd brush.

12-22-2019, 12:54 PM	#9
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Generator vs Alternator I don't see a problem using the 6v generator with 50/32 CP lites. If used quite a bit then you might want to bump up the out put to about 12 amps [ versus 2-4 for normal use]. [ I don't need to use high beams] If an EVR is used then you don't have to worry about always messing with the 3rd brush.