The Ford Barn - View Single Post

Juergen · 02-25-2020, 09:23 AM

Perhaps we have grown to expect excellence from the vendors. In restoring a 39 Ford Standard, I got two sets of used hood side panels (made by Ford) which differed by 1/4 of an inch so I mixed and matched to get the best fitting pair. In the late 50s most of the repro was poor quality from Argentina or functional stuff from vendors like Ricks. We made do as a NOS original was unobtainable. In restoring a 64 GTO, one vendor has noted that some of his products were not totally correct but the best he could get. So you were forewarned that some rework may be required should this be the best you can get. Maybe our V8 catalogs need such a disclaimer.

02-25-2020, 09:23 AM	#19
Juergen Senior Member Join Date: May 2010 Posts: 500	Re: Now it's junk from Carpenter! Perhaps we have grown to expect excellence from the vendors. In restoring a 39 Ford Standard, I got two sets of used hood side panels (made by Ford) which differed by 1/4 of an inch so I mixed and matched to get the best fitting pair. In the late 50s most of the repro was poor quality from Argentina or functional stuff from vendors like Ricks. We made do as a NOS original was unobtainable. In restoring a 64 GTO, one vendor has noted that some of his products were not totally correct but the best he could get. So you were forewarned that some rework may be required should this be the best you can get. Maybe our V8 catalogs need such a disclaimer.