The Ford Barn - View Single Post

Bill OH · 02-20-2020, 04:52 PM

The ground strap for the condenser is held by a 5/16 cap screw that mounts the distributor - remove that cap screw, the two cap screws on the sides of the coil, and the wire terminal nut and that will allow the removal of the coil.

02-20-2020, 04:52 PM	#15
Bill OH Senior Member Join Date: May 2010 Posts: 426	Re: how to remove coil 1941 merc The ground strap for the condenser is held by a 5/16 cap screw that mounts the distributor - remove that cap screw, the two cap screws on the sides of the coil, and the wire terminal nut and that will allow the removal of the coil.