View Single Post
Old 01-12-2020, 04:30 PM   #12
Karl Wolf
Senior Member
 
Karl Wolf's Avatar
 
Join Date: May 2010
Location: Mill Valley,Ca.
Posts: 1,509
Default Re: Rebuilt motor start up

I bench ran a used 59AB,
wood blocks to hold the engine in place
used a radiator held in place by the hoses.
fed the ford fuel pump from a can.
original cast iron exhaust manifolds. No muffler... LOUD.
Oil pressure gauge.

Could have run it as long as I wanted...

Karl
Karl Wolf is offline   Reply With Quote