The Ford Barn - View Single Post

Mike Peters · 07-31-2019, 05:18 PM

Default Re: 31 Standard Roadster Windshield Frame
OK. I think someone drilled a hole to put a mismatched motor on with the shaft going through the frame so I'll get rid of that. The finger pull holes are ok. Are the holes for the top snaps evenly spaced or are there a couple of odd ones near the wiper motor.
fundytides is offline Report Post

Fundy: I looked at an original frame I have and there are five snaps for the top flap. So, from the left side facing the car from the front, the distances are respectively, 1 1/4", 10 1'4", 10 1/2", 10 1'2", 10 1/4", and 1 14" to the opposite side.
Yes, and any extra holes were for the wrong wiper motor, so can be filled. mike

07-31-2019, 05:18 PM	#7
Mike Peters Senior Member Join Date: Aug 2012 Location: South East Wisconsin Posts: 1,279	Re: 31 Standard Roadster Windshield Frame Default Re: 31 Standard Roadster Windshield Frame OK. I think someone drilled a hole to put a mismatched motor on with the shaft going through the frame so I'll get rid of that. The finger pull holes are ok. Are the holes for the top snaps evenly spaced or are there a couple of odd ones near the wiper motor. fundytides is offline Report Post Fundy: I looked at an original frame I have and there are five snaps for the top flap. So, from the left side facing the car from the front, the distances are respectively, 1 1/4", 10 1'4", 10 1/2", 10 1'2", 10 1/4", and 1 14" to the opposite side. Yes, and any extra holes were for the wrong wiper motor, so can be filled. mike