The Ford Barn - View Single Post

Mike Peters · 07-31-2019, 01:13 PM

Senior Member

Keith True's Avatar

Join Date: May 2010
Location: Epping N.H.
Posts: 2,341
Default Re: 31 Standard Roadster Windshield Frame
The wiper motor does not bolt to the frame on that car.It has two pinch clamps that hold it in place.Even the vacuum line to it has a couple of friction clamps to hold it in place.The only holes that should be in that frame are the ones for the snaps to hold the top fabric in place.

Yes. Plus two holes in the bottom frame for finger pulls.

07-31-2019, 01:13 PM	#3
Mike Peters Senior Member Join Date: Aug 2012 Location: South East Wisconsin Posts: 1,279	Re: 31 Standard Roadster Windshield Frame Senior Member Keith True's Avatar Join Date: May 2010 Location: Epping N.H. Posts: 2,341 Default Re: 31 Standard Roadster Windshield Frame The wiper motor does not bolt to the frame on that car.It has two pinch clamps that hold it in place.Even the vacuum line to it has a couple of friction clamps to hold it in place.The only holes that should be in that frame are the ones for the snaps to hold the top fabric in place. Yes. Plus two holes in the bottom frame for finger pulls.