Quote:
Originally Posted by KMeredith87
Thanks Dave, will check it out for sure. I was able to track down the intake but it doesn't have the little arms that go on the stud nor do I have the linkage for it. I'm learning all kinds of things about Model A's I didn't know with this adventure into the RHD.
|
Just a little tip if you are putting the exhaust on the manifold. Be VERY careful how you place the clamp. It only has to be out a little and you can't use the clutch. There is VERY LITTLE room for the pedal to go between the exhaust and the block. The clamp usually fouls the pedal till you learn the trick.
In fact, over here, we can buy a clamp that uses no nuts just to make it easier.