View Single Post
Old 03-17-2018, 01:03 AM   #9
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Just what is the difference in the "A" & "B" 4 cylinder Ford engine?

Quote:
Originally Posted by HOTRODPRIMER View Post
Can you elaborate? HRP

Loosen the two clamps, remove the steel pipe and turn it end for end. It's installed backwards now. It'll fit better, and the drain cock will be at the lowest spot.


OK, I was just informed you have a 32, not a Model A, so this pipe isn't correct for your car, and the 32 pipe isn't reproduced. Vince has the correct pipe though.
Here's a like to Vince Falter's website.


http://www.fordgarage.com/

Last edited by Tom Wesenberg; 03-17-2018 at 03:30 AM.
Tom Wesenberg is offline   Reply With Quote