The Ford Barn - View Single Post

gz · 07-09-2020, 09:34 PM

They are pretty simple. If it worked before it should work again. Don't be afraid to open it up carefully and make sure things are OK inside. The only part that really gets damaged is the die cast tumbler (where the key goes into). They make reproductions of this part.

07-09-2020, 09:34 PM	#2
gz Senior Member Join Date: May 2010 Posts: 1,666	Re: 26 modelt ignition switch They are pretty simple. If it worked before it should work again. Don't be afraid to open it up carefully and make sure things are OK inside. The only part that really gets damaged is the die cast tumbler (where the key goes into). They make reproductions of this part.