Quote:
Originally Posted by reddog565
So, what needs to be done to Fix this problem?
|
Quote:
Originally Posted by KULTULZ
Because of your intake type (plenum hanging over valley cover). there will have to be a few modifications. I am sure that is what the original owner attempted.
|
Quote:
Originally Posted by reddog565
So, what needs to be done to Fix this problem?
|
Because of your intake type (plenum hanging over valley cover). there will have to be a few modifications.
Where the problem here is that the PASS CAR had the ROAD DRAFT SYSTEM mounted on the LF engine skirt (BIRD used road draft tube) and EDEL made no allowance for either a tube or PCV. The intake plenum overhangs at that spot.
To begin, using the OEM PCV design, you will have to find a later PV valley pan and offset the plumbing (elbow) from under the plenum to where you can fabricate correct plumbing.
IMO, the system needs to be hidden as much as possible for appearance.
Do you live in Pittsburgh or an outlying area?