The Ford Barn - View Single Post

Andy · 03-10-2019, 05:42 PM

I have a couple of cams that I took out of 32 blocks. On is a cast with a very narrow casting line. The other one is machined all over. I don’t think it was done for lifter clearance. The machined one has the early fine tooth sprocket and the cast one has the later sprocket. Both are press on. Both engines had been rebuilt long ago.
I hope one of them is the correct 32 cam but I have no idea how to ID them.

03-10-2019, 05:42 PM	#1
Andy Senior Member Join Date: May 2010 Location: Kerrville, Tx Posts: 2,771	ID 32 V8 camshaft? I have a couple of cams that I took out of 32 blocks. On is a cast with a very narrow casting line. The other one is machined all over. I don’t think it was done for lifter clearance. The machined one has the early fine tooth sprocket and the cast one has the later sprocket. Both are press on. Both engines had been rebuilt long ago. I hope one of them is the correct 32 cam but I have no idea how to ID them.