Re: Getting the model B transmission together to swap into my 29 Tudor
Bert’s or whoever makes them for him has a nice kit they sell that comes with the clutch cross shaft. Mount for the pedals. And lower mount that attaches the stock A wishbone with the original ball socket mount.
This is the kit I used it is about $240 shipped off evilbay sold by Bert’s on there.
It fit well the only think I had to do is heat up the pedal mount to fit flush against the shift tower so it wouldn’t put stress on the bell housing and crack it when it was completely tightened down. I did have to make my own parking brake mount out of some 90 degree angle and some studs welded on it.
|