Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by cas3
good photos rich. one of the ideas i liked in the the now gone video is, the guy made a 2x4 frame slightly bigger than the roof opening, then stretched and stapled his top fabric on the frame upside down while working on the garage floor. now, when done you flip it over and onto the roof and staple your already stretched fabric into place, then cut around the hole and throw off the 2x4's. never done it, but i like the idea.
|
Friend used the 2x4 frame idea to hold the membrane tight when he secured it to the roof on the A sedan. The frame with the remaining membrane is leaning against the door in the picture.