View Single Post
Old 08-14-2018, 09:31 AM   #7
Bob Bidonde
Senior Member
Bob Bidonde's Avatar
Join Date: May 2010
Location: Long Island, NY
Posts: 1,417
Default Re: Camshaft Plunger !!!!

I have had the experience of a new plunger making a high pitched squeal. There is no need to take the covers off:
1. The squeal will go away as motor oil gets into the plunger;
2. Spray motor oil through the timing pin hole in lieu of removing the covers.
Bob Bidonde

Last edited by Bob Bidonde; 08-15-2018 at 07:42 AM.
Bob Bidonde is offline   Reply With Quote