The Ford Barn - View Single Post

100IH · 11-22-2017, 10:37 AM

The scoops on the rod caps need to have the open side face the camshaft. The caps should be matched to the rod by the stamped number, then the arrow on the piston, if there is one, points forward.

11-22-2017, 10:37 AM	#25
100IH Senior Member Join Date: Dec 2011 Location: SW Idaho Posts: 970	Re: Noise in my ney 29 a engin The scoops on the rod caps need to have the open side face the camshaft. The caps should be matched to the rod by the stamped number, then the arrow on the piston, if there is one, points forward.