Quote:
Originally Posted by pgerhardt
If the problem is just more leg room then the above suggestions cover it. However there is another pretty common problem to look for. If your knee gets trapped under the steering wheel when going from the clutch to the brake while in first gear (like at every complete stop) then the issue is with the shift lever. They bend pretty easily, and can wind up leaning a little toward the driver's side leaving no room for your knee to get by the steering wheel. A little force will cause it to lean a little toward the passenger side completely elimination the problem.
|
I bent mine cold using a hydraulic press. Made a huge difference. Figure out exactly where and how far you want it to go before doing it. You'll have to remove the shift tower from the trans to use the press, but it's worth the trouble.