The Ford Barn - View Single Post - Mushroom lifters

Ol' Ron · 12-11-2014, 07:22 PM

The reason why I ask this is when porting the block the top of the port can beake through on some castings. JWL has some info on ports and guides in his Book. I spent too much time looking for the Holy Grail of ports with a flow bench. But a blower and a little nitro can solve allot of breathing problems.
Good luck.

12-11-2014, 07:22 PM	#45
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,861	Re: Mushroom lifters – Any advice The reason why I ask this is when porting the block the top of the port can beake through on some castings. JWL has some info on ports and guides in his Book. I spent too much time looking for the Holy Grail of ports with a flow bench. But a blower and a little nitro can solve allot of breathing problems. Good luck.