View Single Post
Old 06-02-2019, 09:21 AM   #122
Join Date: Mar 2019
Location: Spring, TX
Posts: 76
Default Re: First Flathead Build

Originally Posted by JSeery View Post
"Now where am I supposed to drill these holes?"

The holes are drilled into the lifter bores in the block, not the lifters themselves. The holes need to line up with in recesses in the lifters.

Gotcha. I take it that is so you can put a pin in there when adjusting so that the lifters donít just spin in the bore? Makes sense

Sent from my iPhone using Tapatalk
sharp21 is online now   Reply With Quote
Sponsored Links (Register now to hide all advertisements)