Quote:
Originally Posted by jayvee34
Embarrassed, Thought I had seen were it was pinned, after cleaning away the grease I see it was not pinned. But here is a couple of pictures.
Ring gear=39 teeth Pinion gear= 11 3.55 to 1 ratio.
|
Thank you, jayvee! This is a sort of 'mystery' part that many of us have heard about over the years, yet never really seen one. If possible, would you stand back just a little so that we can see about 18" or so of the rear of that shaft? And, could you possibly take a picture of the center portion of that torque tube where it looks like there is a sleeve joining the front and rear? Again, kind of a mystery part only found on the early Mercs. Thanks again! DD