Re: Rust 911
Hi Chris,
Not all manufactured coatings provided on cast iron can stop molecules of water from penetrating same; hence, forming ferric oxide is possible.
My guess is what may work best is to provide your Rust 911 treatment, then flush with clear water; and repeat Rust 911 treatment and flushing with clear water to your satisfaction.
Afterwards, adding 50/50 percent coolant/distilled water, and providing Prestone antifreeze coolant can prevent further Model A block rusting as well as any other manufactured product.
There are so many varying Forum "Pro & Con" opinions on any Model A subject that one just has to pick and choose whatever one thinks is best.
This is the most "non-asinine" coolant suggestion I can think of ........... prior to a most wonderful July 4th weekend.
I hope you have great success with your Rust 911 and have a Happy 4th.
Last edited by H. L. Chauvin; 06-30-2017 at 10:50 PM.
Reason: typo
|