The Ford Barn - View Single Post

Brian · 02-24-2018, 07:37 PM

Well...a 59A block uses two dowels to accurately align the intake with top of block, so, maybe just open up the bolt holes a tad to provide a bit more clearance, the dowels will still locate the intake in correct place

02-24-2018, 07:37 PM	#2
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 3,835	Re: Intake not mating up to block very well Well...a 59A block uses two dowels to accurately align the intake with top of block, so, maybe just open up the bolt holes a tad to provide a bit more clearance, the dowels will still locate the intake in correct place __________________ Unfortunately, two half wits don't make a whole wit!