Re: Cracked block repair
I have a crank in the same place I used this:
http://www.jbweld.com/product/j-b-highheat/
Like true welding, the prep work is 98% of the task... clean to bare metal... So far so good...
This JB weld is a putty so you have to really work in with your fingers.. I did it for 15mins...
__________________
-Mike
Late 31' Ford Model A Tudor, Miss Daisy
I don't work on cars --I'm learning about my Model A.
Cleveland, Ohio
Last edited by mshmodela; 11-24-2014 at 12:00 PM.
|