Quote:
Originally Posted by MGG
I would try to duplicate the set-up you have on the driver's side. Most auto parts stores should have the rubber bends you would need and the straight piece can be obtained from a muffler shop. Personally I do not like the accordian style hose because it seems to me (and I do not have any proof of this) that the wrinkles would impede coolant flow.
|
Haha, you are both right. I agree things should be done correctly. I agree that some old farmers like my grandpa used "creativity" get things back on the road.
That is why I am asking questions. Trying to reverse engineer what has been done over the last 80 years is a challenge for me with my limited knowledge of this hobby. Trying to put it all back together in more correct way learning as I go is an experience. I thank all you who have chimed in.