The Ford Barn - View Single Post

jw hash · 06-13-2019, 08:18 AM

the welting is one continuous piece, it goes all the way down to the bottom of the body in the rear. NO on the running board but it does go on the splash apron down pass the running board in the front. mount the fender on the body leaving out the bolts for the splash apron and running board, leave the upper nuts loose, now start installing the welting. you have to cut some relieves in the welting along the welding when you work it in.

06-13-2019, 08:18 AM	#2
jw hash Senior Member Join Date: May 2010 Location: Auburn Washington Posts: 2,552	Re: Rear Fender Welt the welting is one continuous piece, it goes all the way down to the bottom of the body in the rear. NO on the running board but it does go on the splash apron down pass the running board in the front. mount the fender on the body leaving out the bolts for the splash apron and running board, leave the upper nuts loose, now start installing the welting. you have to cut some relieves in the welting along the welding when you work it in.