Sponsored Links (Register now to hide all advertisements)
1932 model commercial vehicle frames were stamped differently than those used underneath passenger car bodies, but only to the extent of the number of times the engine number was stamped on the frame (once for commercial vehicles and trucks and three times for passenger cars).
While there are some minor variations given that the numbers were hand stamped your number should be at or just in front of the foot of the firewall on the left side close to the inner edge of the frame rail. The original webbing under the left front fender was notched to permit seeing the number without removing the fender and its webbing. But, despite the specific instructions from Dearborn of where to stamp the engine number, exceptions are not unheard of.