View Single Post
Old 07-18-2018, 09:55 AM   #22
DHZIEMAN
Senior Member
 
Join Date: Dec 2016
Location: Sunrise Beach, Mo
Posts: 439
Default Re: Modern 3 prong flasher

Quote:
Originally Posted by redmodelt View Post
Ok so my really good flasher gave up the ghost and replaced it with one of the modern ones sold by Snyder's. Now instead of going flash...flash...flash it goes flashflashflash. It's a standard 6 volt system and bulbs. While this is on both my Model T and 48 F2 (I have the same flashers right now on both and both are doing the same), do I need to install a resister on the power input or?

Thanks
Ok! We all have been posting on this thread trying to help! A 3 prong flasher wiring sketch is attached for a 12 volt negative ground system. Adjust it to fit your 6 volt conditions and make up a small test jig. Test the flasher off the car on a test jig! If it works, you have more work to do, If not Snyders are good folks, they will take care of you!
Attached Images
File Type: jpg 3prong.jpg (17.6 KB, 14 views)
DHZIEMAN is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)