Thread
:
Valve stems
View Single Post
10-09-2018, 09:45 AM
#
2
100IH
Senior Member
Join Date: Dec 2011
Location: SW Idaho
Posts: 970
Re: Valve stems
Might be too tight just as much too loose on a valve to valve basis. In other words each one tells its own story, starting over again. Because of the re-grind cam, might tend to be loose. Go with adjustable lifters.
Sponsored Links (Register now to hide all advertisements)
100IH
View Public Profile
Send a private message to 100IH
Find More Posts by 100IH