View Single Post
Old 06-29-2012, 07:46 PM   #3
Senior Member
jbc's Avatar
Join Date: May 2011
Location: ocala fl
Posts: 160
Default Re: wheel spacer question

In order to put hydraulics on an A with out using a spacer, you have grind or machine 1/8 off the inside flange of the drum and the outer lip of the backing plate. You also need to remove about 1/6 off the outer edge of the brake shoes. Looks like 5/16 or 3/8 should be thick enoughs for a spacer. I wish I had gone that way.
jbc is offline   Reply With Quote