Re: 110 compression/gas in oil
The problem I am having is the gas level has stopped dropping. I am going to check tomorrow and see if the level still remains at the top of the power valve springs. If this is the case than the gas is seeping out somewhere else than the power valves neoprene ring gasket. If the springs opens up under weak vacuum why would the valves stay sealed with the intake manifold with my two 94s installed sitting on my work bench stay closed? There is absolutely no vacuum keeping the power valves closed? This is all very confusing to me.
Last edited by RandyMettler; 01-04-2019 at 10:17 PM.
|