The Ford Barn - View Single Post

Mike C · 10-04-2016, 01:31 PM

Yes, carb is correct and the metal vacuum line is connected. Fuel pump is a brand new mechanical pump. The previous owner had installed an electric pump which I removed last year. Too much pressure.
The engine, I believe is an 8BA based an the castings of the heads.

10-04-2016, 01:31 PM	#3
Mike C Junior Member Join Date: Oct 2010 Location: Hayesville, NC Posts: 9	Re: distributor problrrm? Yes, carb is correct and the metal vacuum line is connected. Fuel pump is a brand new mechanical pump. The previous owner had installed an electric pump which I removed last year. Too much pressure. The engine, I believe is an 8BA based an the castings of the heads.