The Ford Barn - View Single Post

Ideucev8 · 04-29-2020, 09:25 PM

The same slinger is used from about 1939 through to the 8BAs & as the seal sleeve was part of the front pulley on the pre 8BAs you could slide the slinger off & on with the key in place.
Phil

04-29-2020, 09:25 PM	#14
Ideucev8 Member Join Date: Jan 2018 Location: Kaikoura New Zealand Posts: 58	Re: Oil slinger, crank snout, crank sleeve. The same slinger is used from about 1939 through to the 8BAs & as the seal sleeve was part of the front pulley on the pre 8BAs you could slide the slinger off & on with the key in place. Phil