The Ford Barn - View Single Post

Yooper James · 10-14-2018, 10:14 AM

Thank you Gents!

Upon removal and close inspection of the bar, it appears to have been repaired badly and is not symmetric. Mounting it reversed appears even worse. I do have a 28/29 bar which bolted up with the flats to the back (the pads didn't exactly fit the fenders, so the bolts aren't pulled up tight) but the "cups" are tipped forward and the headlights adjust great. I'm now hunting for a good condition lamp support for 30/31

mantta, I'm in Calumet.

Great forum, thanks again for the help!

YJ

10-14-2018, 10:14 AM	#7
Yooper James Junior Member Join Date: Feb 2016 Location: Calumet, MI + Duluth, MN Posts: 3	Re: 1930 Lamp Support Bar Thank you Gents! Upon removal and close inspection of the bar, it appears to have been repaired badly and is not symmetric. Mounting it reversed appears even worse. I do have a 28/29 bar which bolted up with the flats to the back (the pads didn't exactly fit the fenders, so the bolts aren't pulled up tight) but the "cups" are tipped forward and the headlights adjust great. I'm now hunting for a good condition lamp support for 30/31 mantta, I'm in Calumet. Great forum, thanks again for the help! YJ Last edited by Yooper James; 10-15-2018 at 12:20 AM. Reason: typo