The Ford Barn - View Single Post

redmodelt · 09-09-2020, 06:38 PM

Once you pull the cap of the axle tube you then need to take the sleeve out. The seal, if there is one now, is behind it. Most have found that the modern seal on the inside work great for keeping the rear lube from diluting the grease so the felt outers work fine. You will need the sleeve puller to get the sleeve out.

09-09-2020, 06:38 PM	#2
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,340	Re: Rear end/axle grease seal question Once you pull the cap of the axle tube you then need to take the sleeve out. The seal, if there is one now, is behind it. Most have found that the modern seal on the inside work great for keeping the rear lube from diluting the grease so the felt outers work fine. You will need the sleeve puller to get the sleeve out. __________________ I know the voices aren't real but damn they have some good ideas!