Quote:
Originally Posted by mccsix
I'm trying to sort it with y'alls help. So far I have removed the resistor & wire and a another wire from the ammeter to the ign sw. I have a new ammeter not installed, old one had terminal insulators melted so posts touched the case.
Does anyone have elec diagram for a 12v conversion.? if I had that I would change out that rats nest of red wires on the firewall, one wire at a time.
|
As previously stated, the normal 'A' wiring diagram is all thats needed. No difference in 6v vs 12v except polarity, coil[maybe] and bulbs.
Points are grounded the same as the battery whether + or - .
Bob posted a diagram in #17