The Ford Barn - View Single Post

arnhemmer · 11-11-2018, 05:01 PM

Put lever in full retard and place pin in timing gear dimple (DTC) and recheck the distributor rotor position. Cam might have come loose. Idling in full advance when everything is normal is not good for the motor. It actually should stumble due to being too far advanced when idling.

11-11-2018, 05:01 PM	#4
arnhemmer Senior Member Join Date: Jan 2015 Location: San Jose California Posts: 150	Re: Strange timing behavior Put lever in full retard and place pin in timing gear dimple (DTC) and recheck the distributor rotor position. Cam might have come loose. Idling in full advance when everything is normal is not good for the motor. It actually should stumble due to being too far advanced when idling.