The Ford Barn - View Single Post - Brake floater kit A-2051-F review

Bill G · 01-30-2018, 05:00 PM

The set that I got work well, and I made sure the shoes were centered. However, the posts that bolt to the backing plate are probably 1/4 inch shorter than the stock set! This causes the bolt to not be able to be pinned with the cotter pin. In the spring, I will probably get another set. I don't even remember who I got them from, but I think it was Mike's.

For now, I put a lock washer on it and that has held for the little amount of driving I do.

01-30-2018, 05:00 PM	#16
Bill G Senior Member Join Date: Jun 2017 Location: Walla Walla, WA Posts: 1,045	Re: Brake floater kit A-2051-F review The set that I got work well, and I made sure the shoes were centered. However, the posts that bolt to the backing plate are probably 1/4 inch shorter than the stock set! This causes the bolt to not be able to be pinned with the cotter pin. In the spring, I will probably get another set. I don't even remember who I got them from, but I think it was Mike's. For now, I put a lock washer on it and that has held for the little amount of driving I do.