Quote:
Originally Posted by Miles in MN
What is the source of the Chev crank and cam? Are they early or are they from the 153 cid overhead? Didn't Chevrolet transition from four to six cylinder in 1927 or 28? Very interesting project!!
|
They went to the 6 cylinder in 29. The crank is from a V8, so you can not use the A cam, because the A is a flat crank. The chev is 90 degree crank. The valve timing would be wrong.
The 153 crank would be great, but it is to short for the A block. The A block is wide between 2,3 cylinders because of the dist. going through the head and into the block.